Gigabit Ethernet PoE++ Injector, 802.3at Power pins: 4/5(+),7/8(-) and 3/6(+), 1/2(-), 95W

Minimize cabling for wireless APs, IP phones, or any other PoE compatible device!

• Meets the 802.3af/at PoE standard
• 10/100/1000Mbps network speed
• 55V output voltage, 95W
• Cable connection: 10/100/1000 Mbps
• Power consumption: 3W max.

The Digitus PoE Injector minimizes your cabling when installing PoE compatible devices such as IP network cameras. Only the Ethernet cable is used for the data feed and power supply for the devices. This eliminates the need to install a separate power line, and you can extend your network where there are no power outlets or power lines. The injector is fully compatible with the IEEE 802.3af/at PoE standard and delivers output power of up to 95W.

Technical Details

• Meets the 802.3af/at PoE standard
• 55V output voltage, 95W
• RJ45 LAN input
• LAN (RJ45) output, power supply via pin: 4/5(+), 7/8(-) and 3/6(+), 1/2(-)
• Cable connection: 10/100/1000 Mbps
• The output has a current limit, a short-circuit protection and an automatic terminal device detection and classification
• Power consumption: 3W max.
• Power supply: 100-240V AC, 2A
• Operating temperature: -40°C - 65°C
• Dimensions (mm): 214(L) x 134(W) x 41(H)
• Ethernet speed: Gigabit
• Industrial usage: no
• PoE Power budget: 95 W
• PoE standard: IEEE802.3at (PoE+)

Package content

• Gigabit PoE Injector
• Quick start guide
• Power cord